Vertical Wine Rack

vertical wine rack

Below is a visual tour for the making of the wine rack.

walnut 4x4

02012/11/04: 4x4 Walnut as it was when bought.

close-up of cut

02012/11/04: Close-up of the end I already cut on the table saw.

drill press

02012/11/04: New Sears drill press I got at a local 2nd hand store from a seller named Tim.

drilling pilot holes

02012/11/11: Drilling a pilot hole with a 1/4th inch drill bit.

pilot holes cut

02012/11/11: All of the pilot holes cut.

drilling final holes

02012/11/11: Drilling the final hole with a 1-1/4th inch bit.

drilling side view

02012/11/11: Side-view of drilling.

holes completed

02012/11/11: All 16 holes now drilled.

dremel

02012/11/11: Using the Dremel to cut out a section for the mounting brackets.

mounting brackets in place

02012/11/11: Mounting bracket in final position

mounting brackets and screw

02012/11/11: Mounting bracket with masonry screw as it will finally fit.

underneath bracket

02012/11/11: View from underneath bracket.

mineral oil application

02012/11/12: Applying mineral oil from the right to the left.

final view

02012/11/12: The final product hung up.

walnut close-up

02012/11/12: You can see the beautiful banding of the walnut.

wine rack with 7 bottles

02012/11/12: The rack, partly filled, can hold 16 wine bottles.